When you have a site or maybe an app, speed is essential. The quicker your site functions and the speedier your web apps perform, the better for everyone. Because a web site is a variety of data files that connect with one another, the systems that keep and work with these files play a huge role in web site overall performance.

Hard disk drives, or HDDs, were, right until recent times, the most dependable devices for storing data. However, lately solid–state drives, or SSDs, have been rising in popularity. Look into our comparability chart to determine if HDDs or SSDs are more suitable for you.

1. Access Time

With the introduction of SSD drives, file accessibility rates have gone over the top. Due to the brand new electronic interfaces found in SSD drives, the normal data file access time has shrunk to a record low of 0.1millisecond.

HDD drives continue to take advantage of the same general data access technique which was actually created in the 1950s. Although it was significantly advanced consequently, it’s sluggish when compared to what SSDs are offering. HDD drives’ file access speed varies in between 5 and 8 milliseconds.

2. Random I/O Performance

Because of the brand new revolutionary data storage method adopted by SSDs, they offer speedier file access speeds and swifter random I/O performance.

All through our tests, all SSDs showed their ability to manage a minimum of 6000 IO’s per second.

Hard drives feature reduced data file access speeds as a result of aging file storage and access technique they are implementing. Additionally they display significantly reduced random I/O performance when compared to SSD drives.

In the course of our tests, HDD drives handled on average 400 IO operations per second.

3. Reliability

The lack of moving components and spinning disks inside SSD drives, and the latest advancements in electric interface technology have generated a much less risky data file storage device, having an common failing rate of 0.5%.

HDD drives use rotating disks for keeping and reading info – a concept dating back to the 1950s. And with disks magnetically hanging in mid–air, spinning at 7200 rpm, the prospects of anything failing are usually bigger.

The common rate of failing of HDD drives can vary among 2% and 5%.

4. Energy Conservation

SSD drives are far smaller than HDD drives as well as they do not have any kind of moving components whatsoever. It means that they don’t make so much heat and need significantly less energy to function and much less power for cooling reasons.

SSDs consume amongst 2 and 5 watts.

HDD drives are well known for getting loud; they’re more likely to overheating and whenever you have several hard drives in a single server, you have to have an additional a / c device used only for them.

All together, HDDs take in somewhere between 6 and 15 watts.

5. CPU Power

SSD drives permit faster file access rates, which will, subsequently, permit the processor to finish file calls faster and after that to go back to other jobs.

The normal I/O hold out for SSD drives is exactly 1%.

When using an HDD, you’ll have to invest additional time looking forward to the outcomes of one’s data file request. Because of this the CPU will stay idle for more time, looking forward to the HDD to reply.

The average I/O wait for HDD drives is around 7%.

6.Input/Output Request Times

The majority of SuperLinx.NET’s completely new web servers now use exclusively SSD drives. All of our tests have demostrated that having an SSD, the typical service time for an I/O request whilst building a backup stays below 20 ms.

All through the very same trials sticking with the same hosting server, this time around fitted out using HDDs, functionality was significantly slow. During the server backup procedure, the regular service time for I/O demands ranged between 400 and 500 ms.

7. Backup Rates

Referring to back–ups and SSDs – we’ve observed an exceptional advancement with the back up rate since we moved to SSDs. Now, a normal web server back up takes simply 6 hours.

On the other hand, on a web server with HDD drives, the same data backup takes three or four times as long to complete. A full backup of an HDD–driven web server usually takes 20 to 24 hours.

To be able to at once raise the performance of your respective sites with no need to alter any code, an SSD–driven web hosting solution is really a really good choice. Look at SuperLinx.NET’s cloud hosting plans packages and then our VPS plans – our services include really fast SSD drives and are available at good prices.


  • Service guarantees

  •  
  • Each of our Virtual Private Servers is configured for you free of cost. 99.9% network uptime. Full admin server access.
  • Compare our prices

  •  
  • Simply examine the parameters and characteristics offered by SuperLinx.NET’s Virtual Private Servers. Discover exactly which VPS setup will give you just what you’ll need to handle your multi–media online presence effortlessly.
  • Compare our hosting plans
  • Contact Us

  •  
  • Our representatives are available for you 24 hours a day to answer any inquiries in relation to our VPS solutions. 1–hour reply–back time frame guarantee.